Quick Tip: Trail Tech Temp Gauge Plug Mod

If your like me and is obsessed with clean wiring then this tip is for you. If you running a Trail Tech Temp Gauge on your bike, that white plug that connects the display unit to the heat sensor can be bulking when your trying to hide the wires.

Here's a quick how-to for cleaning up the bulk. It requires no soldering which could damage the sensor wiring:

1)  Disassemble the plug leaving the pins attached.

2)  Reconnect the corresponding pins and heat shrink them into place.

3) Then add one more heat shrink tube for final secure

So simple and so clean.

Happy Tuning!!